Horizontal Directional Drill and HPU
Power Dynamics Innovations Custom-Built 500,000 POUND HDD RIG
DRILLING RIG DIMENSIONS (TRANSPORT)
• Curb Weight: Approx 64,000 lbs
• Length: 45 ft
• Width: 8' - 6"
• Suspension: 60,000 lb tandem axle
• Drill Rack Angle: 8.2 - 13 degrees
OPERATIONAL
• Max Thrust: 500,000 lbs
• Max Pullback: 500,000 lbs
• Max Spindle Torque: 50,000 ft-lbs
• Max Spindle Speed: 68 rpm
• Max Carriage Speed: 70 ft/min
FRONT BREAKOUT VISE
Max Clamp force: 452,395 lbs @ 3000 PSI
• Max rotating torque: 150,000 ft-lbs

• Three jaw clamp
• Travel = 72"
REAR BREAKOUT VISE
• Max clamp force: 301,593 lbs @ 3000 PSI
POWER SOURCE
• Engine: Caterpillar C27
• Gross horsepower (max): 850 HP
• Max engine speed: 2100 rpm
• EPA Certifications Family: Tier 2
• Fuel Type: Diesel
• Fuel Capacity: 1080 Gal.
• Weight: 30,700 lbs (No Fuel)
• Weight: 38,800 lbs (Full Fuel)
• Hydraulic Tank Capacity: 450 Gal


HPU DIMENSIONS
• Length: 20 ft
• Width: 6.33 ft
• Height: 10 ft
HDD Hydraulic Power Unit
BREAKOUT SYSTEM

     Rear Vise
     • Dual-cylinder design - 8" bore
     • Integrated into carriage to
       reduce breakout time

     Foward Vise
     • Three cylinder design - 8" bore
     • 8.75" inside diameter opening
     • Travel = 6 ft

     Rack Gear Assembly
     • Double I-beam construction

     Trailer
     • Tandem-axle

HDD Rig
HYDRAULIC SYSTEM
• Pumps
  - 2 Rotary Pumps
  - 3 Travel Pumps
  - 1 Vise Pump
  - 1 Dedicated rotary flush pump
  - 1 Dedicated kidney loop pump

• Thrust / Pullback Circuit
  - Hydraulic pumps
     3 - Sauer Danfoss Series 90 - 250
  - Travel Motors
     2 - Hagglunds CA-100
  - Planetary gears: 6" tall x 15" OD
  - Gearboxes: 2 - Siemens (Flender) P1HA14

• Rotation Circuit
  - Hydraulic Pumps: 2 - Sauer Danfoss 90 - 250
  - Hydraulic Motor: 1 - Hagglunds CA-210

• Auxiliary Circuits
  - Vise Pump (PFC-LS pump)
     1 -  Sauer Danfoss Series 45
  - Hydraulic Pump:
     1 - Dedicated Kidney Loop pump
     1 - Hydraulic Rotary Flush Pump

• Hydraulic Quick Disconnects
  - Parker / Snap-tite

• Heat Exchanger / Cooler
  - Cold oil 60 psi w / bypass & w / variable speed fan

     Front Deadman- Small
     • 9' - 6" long x 5' wide x 8" high

     Rear Support Pad
     • 16' long x 7' - 10 wide x 8" high

• Hydraulic Reservoir
  - 450 gal capacity
  - In-tank filtration
  - Hot-oil sump to separate hot and cool oil
  - 3 suction strainers with shutoffs


• Filtration Components
    5 - 25 micron charge pump filters
    10 - 10 micron high press filters
    1 - 25 micron flush filter
    1 - 25 micron vise high psi filter
    1 - 25 micron vise return filter
    1 - 25 micron kidney loop filter
Horizontal Directional Drilling Rig Control Cab
DRILLING CONTROL CAB
• Three safety glass windows with steel protective panels
• High-density foam insulation with polymer paneling
• Pressure Gauges: Push, Pull, & Vise Makeup, 5000 psi ea.
• Mud Gauge - 2800 psi
• Sauer Danfoss Pump Joystick Controllers
• Torque limiter adjustment for thrust, pull back, rotary, & vise-makeup
• Engine emergency shutdown switches & joystick kill switches
• 5 bank Hawe Valve Body
• 4 bank Hawe Valve Body

CONTROL CAB DIMENSIONS
• Length: 10'
• Width: 8'
• Height: 8' - 4"
• Weight: 7220 lbs
Power Dynamics Innovations Optional Equipment
Horizontal Directional Drilling Rig Front Deadman
IN-GROUND FRONT DEADMAN

• Length : 16 feet
• Width : 5 feet
• Height : 2 feet
• Weight : 6448 pounds
Horizontal Directional Drilling Rig Jacking System
Telescopic Jacking System

• 3 stage telescopic cylinder
• Double acting
• Rated for : 3000 PSI
• Stroke : 93"
• Bore Sizes : 8.25 x 6.75 x 5.5
• Rod Sizes : 7.5 x 6 x 5
• Max Extend Load : 110,000 pounds
• Closed Length : 47.50"
Horizontal Directional Drilling Rig Mega Vise
Mega Foward Vise

• Three cylinder design
• 8" bore forged steel cylinder barrels
• 8.75" inside diameter opening
• Travel = 6 ft
Dynamic Power    Horizontal Directional Drilling Rigs

Manufacturing and Service
TM.